Akai_MPC5000_Service_Manual.pdf

(6588 KB) Pobierz
SERVICE MANUAL
MODEL: MPC5000
SPECIFICATIONS
General
Display /
240 x 128 dot graphic LCD w/back light
Memory card slot /
Compact Flash (The size of the compact flash
card
that MPC5000 can handle is from32MB to 2GB)
Dimentions (W x H x D) /
18in x 16 1/16 x 3 3/8 (6 7/8 with screen
at max)
Weight / 18.2 lbs
Power reqirement /50W
Sampling rate /
44.1kHz
Memory capacity /
64MB standard ,expandable to 192MB
Recording time /
12m 48sec. (64MB, MONO),38m24sec.(192MB
MONO)
Memory expansion slot /
1 x for optional EXM-E3
Data format /
16-bit linear
Polyphony /
64
Dynamic filtering
/ 1 State Variable Filter per voice (up to 8 pole,
depending on type)
Filter type /
LOW PASS, BAND PASS, HIGH PASS, BAND
BOOST, BAND STOP, ANALOG MODELING, VOCAL
FORMANT
Preset sound memory /
16MB
Number of programs /
128
Effects /
4 stereo busses with 2 stereo effects per buss, and Master
effect
Master effect/4
band EQ, Compressor
Maximum events /
100,000 notes
Resolution /960
parts per 1/4-note
Sequences /
99
Tracks per sequence /
64
MIDI output channels /
64 (16 channels x 4 outputs)
Song mode /
20 songs, 250 steps per song
Drum pad /
16 (velocity and pressure sensitive)
Drum pad banks /
4
Sync mode /
MIDI clock, MIDI Time Code
Transport Controls/MIDI
Machine Control
Record input (L and R) /
MIC/ 1/4-inch Combo x 2 balanced
-40dBu, input impedance 11k ohms; RCA with PHONO preamp,
Max. Input level /+10dBu
Digital input /
RCA-pin x 1 S/PDIF
Stereo output (L and R) /
1/4-inch phone x 2 balanced +11dBu,
output impedance 1k Ohms,
Max. output level/
+22dBu
8 individual outputs /
1/4-inch phone x 4 balanced +11dBu, output
impedance 1k Ohms,
Max. output level /+22dBu
Phones output /
1/4-inch stereo phone x 1, 200mW / 100 ohms
Digital output
/ RCA-pin x 1 S/PDIF
ADAT Optical x 1 (8 Channels)
MIDI inputs /
5-pin DIN x 2
MIDI outputs /5-pin
DIN x 4
USB /
Slave connector x 1, USB MASS STORAGE CLASS support
(Windows 2000/Me/XP or later version, or Mac OS 9.x/10.x or later
version. )
Footswitches /
1/4-inch x 2
Inputs/Outputs
Sound generator
Standard accessories
Options
Standard accessories /
Power cable,Operator's manual
EXM-E3/128MB
expansion memory card (Upgrades unit to 192MB
total) CDM-25 CDR/DVD Drive
Effects
Data Compatibility
Sequencer
MPC1000 /
SEQ, WAV, PGM
MPC2000/2000XL
/ SEQ, WAV, SND, PGM (Most parameters of
PGM file can be loaded.)
MPC4000 /
SEQ, WAV, PGM (DRUM program only. Only note
assign and tune are loaded.)
MPC3000 /
SND (THRU Computer)
Z4/Z8 /
SEQ, WAV, PGM,(DRUM program only. Only note assign
and tune are loade.)
S5000/6000 /
WAV only (THRU Computer)
S1000/3000 /
No compatibility
1.
DISASSEMBLE THE FRONT COVER.
(A) REMOVE 4 PCS SCREW FROM FRONT COVER.
DISASSEMBLY PROCEDURES
2.
(A)REMOVE 17 PCS SCREW FROM BOTTOM COVER.
(B)THE BOTTOM COVER CANNOT BE TAKEN AWAY START, FIRST LIFTS ANGLE 30~40, DISASSEMBLY CABLE
FROM HP HARD DISK, THEN TAKE THE BOTTOM COVER OFF.
(Fig1)
DISASSEMBLE THE BOTTOM COVER.
(Fig2)
(A) REMOVE 6 PCS SCREW FROM SIDE CAP.
(B)
REMOVE 9 PCS SCREW FROM THE PART
3.
DISASSEMBLE THE SIDE CAP AND PALMREST.
4.
(Fig3)
REMOVE 4 PCS SIDE CAP AND 4 PCS SPACER SLIDE FROM TOP PANEL.
REMOVE 6 PCS SCREW FROM TOP PANEL.
REMOVE 4 PCS SCREW FROM PANEL SIDE.
REMOVE 4 PCS SCREW FROM PANEL TOP.
LIFT THE LCM MODLE.
WIPES OUT 2 PCS SCREW FROM PANEL LCM MODLE.
(A)
(B)
(C)
(D)
(E)
(F)
DISASSEMBLE THE TOP PANEL.
(Fig4)
5.
DISASSEMBLE
(A) REMOVE 5 PCS SCREW FROM MAIN CONTROL PCB.
(B) REMOVE 3 PCS SCREW FROM VOLUME PCB.
(C) REMOVE 5 PCS SCREW FROM Q LINK PCB.
(D) REMOVE 3 PCS SCREW FROM SYNTH PCB.
(E) REMOVE 2 PCS SCREW FROM SELECT PCB.
MAIN CONTROL PCB, VOLUME PCB,Q LINK PCB,SYNTH
PCB,SELECT PCB ASS’Y.
6.
DISASSEMBLE THE PAD ASS’Y.
(Fig5)
(A) REMOVE 6 PCS SCREW FROM THE HOLDER PAD.
(Fig6)
7.
DISASSEMBLE PANEL LCM MODLE.
(A) REMOVE 4 PCS SCREW FROM PANEL LCD BOTTON.
(A) REMOVE 3 PCS SCREW FROM THE REAR PANEL.
(B) REMOVE 4 PCS SCREW FROM THE REAR PANEL.
8.
(Fig7)
DISASSEMBLE THE MAIN PCB ASS’Y.
(Fig8)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin