TrainingCourse ArtCAM Pro ENG.pdf

(15906 KB) Pobierz
ArtCAM Pro 2010
Training Course
Delcam plc,
Talbot Way, Small Heath Business Park, Birmingham, B10 0HJ.
www.delcam.com
Important Notice
This document is supplied as part of a Delcam Training Course. It is not intended to be
distance-learning material: rather as an aid for Tutors when presenting material to course
delegates and as a subsequent aid memoir to those delegates.
Delcam does not accept responsibility for any personal belongings / valuables whilst on the
premises. Delegates are advised to keep their belongings on their person at all times.
Delcam plc. has no control over the use of the software described in this document and
cannot accept any responsibility for any loss or damage howsoever caused as a result of using
the software. Users are advised that all results from the software are checked by a competent
person in accordance with good quality control procedures.
The software described in this document is furnished under a license agreement and may be
used only in accordance with the terms of such license.
Copyright
2010 – Delcam plc. All rights reserved
UK Training Centre
Tel: 0121 683 1050
Fax 0121 7665511
UK Customer Support
Tel: 0121 683 1010
Fax: 0121 7665542
ArtCAM
Contents
ArtCAM Pro 2010 Contents
Chapter
Page No.
1. Introduction
2. Generating Vectors
3. Vector Editing
4. Generating a Relief
5. Pictures
6 3D Blend and Fade Relief
7. Extrude, Spin, Turn, and Two Rail Sweep
8. Weaves
9. 3D Clipart and Texturing
10. Relief Layers
11. Relief Editing
12. Toolpath Options
13. Machining a Relief
14. 3D Cut Out Machining
15. Post Processing Toolpaths
16. Toolpath Templates
17. 2D Vector Machining
18. Engraving and Scribe Lines
19. Drilling
20. Projects
1-1 to 1-18
2-1 to 2-18
3-1 to 3-20
4-1 to 4-30
5-1 to 5-12
6-1 to 6-6
7-1 to 7-18
8-1 to 8-10
9-1 to 9-14
10-1 to 10-8
11-1 to 11-16
12-1 to 12-2
13-1 to 13-24
14-1 to 14-8
15-1 to 15-8
16-1 to 16-4
17-1 to 17-12
18-1 to 18-6
19-1 to 19-4
20-1 to 20-12
Issue ArtCAM Pro 2010
1
Contents
ArtCAM Pro
2
Issue ArtCAM Pro 2010
ArtCAM
1. Introduction
1. Introduction
Introduction
ArtCAM Pro
allows complex
Reliefs
(ArtCAM
3D models)
to be created quickly and easily
from
2D vectors
(ArtCAM
Wireframe)
or
bitmaps
(Image
files).
These
vectors
and
bitmaps
can be generated within
ArtCAM
or imported from other systems.
ArtCAM
can
also import
3D Surface
data, which is translated on entry or after as a
Relief
model.
ArtCAM Pro
contains tools for editing the reliefs and combining stored reliefs. Once a 2D
model or a 3D relief has been created, toolpaths can be generated to machine it. Multiple
toolpaths are easily generated for roughing, finishing and engraving. The toolpaths can then
be simulated to allow complete visualisation of the product before actual machining.
Starting ArtCAM Pro
•
Double click the
ArtCAM
icon
mouse button.
on the desktop screen with the
left
The
ArtCAM
start up screen appears as shown above. To start working in
ArtCAM
the user
must create a
New Model
or for more complex assemblies, a
New Project. Projects
will be
covered later at a more advanced stage of the training course.
Issue ArtCAM Pro 2010
1.1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin