Programming Guide for UV-82X3.pdf

(507 KB) Pobierz
BAOFENG UV-82X3 Programming Guide
INTRODUCTION
BAOFENG UV-82X3 is a Tri-band (VHF, UHF, 220MHz) versatile amateur radio with
dual PTT. It offers 128 channels, you can add or remove channels from scanning list
and give channels alphanumeric names via programming with a computer, full
accessory compatibility with all UV-82 accessories. With the enhanced capabilities of
the UV-82X3 radio, this Programming Guide will help users get a quick start to
program the radio.
Contents
1. Cable Driver Installation..............................................................................................
2
2. Radio Reading...............................................................................................................3
3. Channel Information....................................................................................................4
4. Optional Feature..........................................................................................................
5
1) Basic Setting............................................................................................................5
2) Channel Mode........................................................................................................
6
3) DTMF.......................................................................................................................7
4) Frequency mode.....................................................................................................8
5) Backlight and Sound...............................................................................................
8
6) FM Radio.................................................................................................................9
5. Write and Save.............................................................................................................
9
1
1. Cable Driver Installation
2-Pin K connector programming cable (Package included)
Compatible System:
Latest Window system (i.e. Windows 7, Windows 10)
Cable Driver and Guideline:
Download the corresponding driver which match your computer system (Win7/Win10). They are
2
available on the support section of radioddity.com.
2. Radio Reading
Download and open the UV-82X3 programming software, click Port under Setting menu, select the
corresponding port number, then click “OK”.
3
Read the current information from the radio to your PC to create an initial program template.
Press Program and select Read Data From Radio (or click the button), and click Start button to start
reading the radio.
4
3. Channel Information
The UV-82X3 radio has 128 channels, you can edit the channel number and channel information
according to your needs. The following is an introduction to each term.
Name
RX Freq
TX Freq
Meaning
Receiving frequency
Setting
VHF:136-174/200-260MHz
UHF:400-520MHz
Description
Transmitting frequency VHF:136-174/200-260MHz
UHF:400-520MHz
Refer to the DCS table and Mutes the speaker of the transceiver in the
CTCSS table in the manual. absence of a specific low level digital signal. If the
station you are listening to does not transmit this
specific signal, you will not hear anything.
RX QT/DQT Receiving CTCSS/DCS
TX QT/DQT Transmitting CTCSS/DCS Refer to the DCS table and Transmits a specific low-level digital signal to
CTCSS table in the manual. unlock the squelch of a distant receiver (usually a
repeater).
POWER
W/N
Transmit power
Channel bandwidth
HIGH/LOW
WIDE/NARROW
High power:4W
LOW
：
1W
Wideband (25 kHz bandwidth) or narrowband
(12.5 kHz bandwidth).
(Note: Wideband is unavailable in UV-82X3)
PTT-ID
When to send the PTT-ID
OFF
does not send code; Codes are sent during either the begin
ning
or
BOT
press PTT button to end of a transmission.
send code;
EOT
release PTT button to
send code;
BOTH
press and release
PTT button to send code
Busy
Channel Lockout OFF/ON
ON:
If the channel is occupied, when you press
the [PTT] key on this channel, the radio will make
a beep tone and will not transmit any signal.
OFF:
No matter if the channel is occupied, the
radio will transmit the signal when you press the
[PTT] key.
In the scan mode, whether add the channel to the
scan list.
ON:
the channel is added to scan list;
OFF:
the channel cannot be scanned.
Selects 1 of 15 DTMF codes. The DTMF codes are
programmed with software and are up to 5 digits
each
5
Busy
Scan add
OFF/ON
Signal
Signal code
1-15

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin