FISCU02GBD.PDF

(18 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
MAKE
ALARM/SIREN
POSITION
FIAT
MOD.
SCUDO
YEAR
02
→
X
Position the compact alarms and the sirens in the engine compartment, behind the
headlamps, driver’s side. Pass the cables through the original rubber sleeve
located on the bulkhead that divides the engine compartment from the passenger’s
compartment, over the shock absorber, driver’s side.
Position the modular systems and the modules under the dashboard, driver’s side.
+30:
connect to the 4 mm RED wire located at the entrance of the fuse box.
- 31:
connect with a terminal directly to the car body.
+15/54:
connect to the 1,5 mm PINK wire located in the connector on the left in
the fuse box.
Connect to the WHITE and LIGHT BROWN wires located in the wiring harness
coming from the direction lights switch.
Positive control signal
Front window, driver’s side:
2
cut the 2 mm WHITE wire.
Front window, passenger’s side:
2
cut the 2 mm YELLOW wire.
The connections are made directly in the wiring harness coming out of the modular
system of the windows unit.
Negative control signal
Cut the LIGHT BROWN wire marked n°6291 located in the wiring harness coming
out of the connector of the driver’s side door. Refer to the
diagrama nr.165.
Gasoil pump
Cut the wire coming out of the inertial switch located in the engine compartment.
+50:
Cut the wire located in the position marked “+50” directly coming out of the
ignition key.
Install an additional switch on the headlamp support plate.
Connect to the YELLOW wire located in the wiring harness behind the left lateral
bulkhead, driver’s side.
Connect directly to the wire of the boot lamp. Install an additional push button when
a boot lamp is not fitted on.
2
2
CENTRAL UNIT POSITION
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
CENTRAL DOORS LOCKING
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS SWITCH
BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fiscu02gbd.doc
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
FITTING DIAGRAM N°165
Diagram to make the central locking on
FIAT SCUDO
year
2002
(
for 3100-3900 series antithefts: use the VIOLET/WHITE and ORANGE/WHITE
(
for 7900 serie antithefts: use the VIOLET/ORANGE wires)
wires
)
VIOLET/WHITE
ORANGE
ORANGE/WHITE
GREY/BLACK
VIOLET
Central locking
unit
Door switch
driver’s side
LIGHT BROWN nr. 6291
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fiscu02gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin