MISPS02GBBT.PDF

(29 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
X
MAKE
MITSUBISHI
MOD.
SPACE STAR *
YEAR.
02
→
* Models with original equipment keyless entry system.
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the lower part of the black box,
on the left of the engine compartment. Pass the cables using the original
rubber core hitch located under the cover of the left side of the wheelhouse.
Position the modular systems and the modules under the dashboard, driver’s
side.
+ 30:
connect to the WHITE wire located at the entrance of the fuse box.
- 31:
connect with a ring terminal directly to the car body.
+15/54:
connect to the BLACK/WHITE wire located in the wiring harness on
the coming out of the ignition key.
Connect to the RED/GREEN wire and to the GREEN/BLACK wire located in
the flying wiring harness placed behind the fuse box.
Positive control signal
Front window, driver’s side:
cut the GREEN/RED wire.
Front window, passenger’s side:
cut the RED/YELLOW wire.
The connections must be done on the coming out of the push-button panel
inside the driver’s side door.
Connections antitheft/vehicle
Art. 3800
Vehicle
Position
YELLOW/BLACK BLUE/WHITE
pos. nr.23, 32 way white connector
GREY/BLACK
BLUE7BLACK
pos. nr.29, 32 way white connector
VIOLET
BROWN/RED
pos. nr.24, 32 way white connector
ORANGE
GREEN
pos. nr.30, 32 way white connector
VIOLET/WHITE
ground
car body
ORANGE/WHITE positive
supply in the fuse box
The 32 way white connector is located behind the sill cover, driver’s side.
Fuel pump
Cut the BLACK/RED wire located in the wiring harness coming out of the fuel
pump placed under the rear seat.
+50:
Cut the BLACK/RED wire located in the wiring harness coming out of
the ignition key.
Install an additional switch on the headlamp support plate, driver’s side.
Connect to the RED/GREEN wire located in the wiring harness coming out of
the 6 way white connector placed in the lower part of the dashboard, driver’s
side.
CENTRAL UNIT POSITION
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
ACTIVAT./DEACTIVATION
CONTROLS
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS AND BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
misps02gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin