393813602-OP-COM-Information.pdf

(162 KB) Pobierz
www.szhtech.com
OP-COM
OP-COM - PC based Opel diagnostic program
OP-COM is a PC based diagnostic program.
It covers almost all Opel cars,
even new cars with CAN-BUS based diagnostic,
such as
Vectra-C, Astra-H,
Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and
supports remote, and key programming.
The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the
appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Fault codes will be shown with all available information:
©
2006 SZH Technology CO.,LTD.
www.szhtech.com
Full fault code text description
Full status information (Present, Not present, Intermittent)
You can print out, save, or copy the fault codes to any other application.
From the fault codes window, you can go directly to the measuring blocks window.
OP-COM
The program shows you measuring block information on many control module, you can choose anything from the list
on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is
depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine
(ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using
KWP-2000), and the newest CAN based control units are very fast!
©
2006 SZH Technology CO.,LTD.
www.szhtech.com
OP-COM
You can also run output tests on many controllers.
You will get a feedback on the state of the activated output. This will helps you to find the failed components more
easily.
©
2006 SZH Technology CO.,LTD.
www.szhtech.com
OP-COM
With OP-COM, you can
learn keys to immobiliser,
and
remote keys to the central door locking,
or
alarm.
You can also
reset,
and
program
the following immobiliser related items:
ECM, BCM, IPC.
You will need the vehicle
security code,
which can be found on the
CAR-PASS.
You can also
reset,
and
program
the
Service interval reminder
on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
You can
code SAB6,
and
SAB8 airbags
with the software.
©
2006 SZH Technology CO.,LTD.
www.szhtech.com
OP-COM
The
diagnostic inteface is USB port based,
so there will be
NO COMPATIBILITY ISSUES,
with serial to USB
converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed
CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is
available for CAN-BUS.
Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM is
quite affordable.
Not to mention the
free software updates,
which can be downloaded from the internet.
OP-COM is under continous development, new version will be availabe approximately every 3-4 month.
The update is
FREE,
and can be downloaded from our website.
OP-COM is currently available at the following languages:
Hungarian :)
English
German
Turkish
Romanian
French
Also being translated to the following languages (will be available shortly):
Danish
Portuguese
©
2006 SZH Technology CO.,LTD.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin