Casio Operation Guide 5433, 5451.pdf

(130 KB) Pobierz
MA1409-EA
© 2014 CASIO COMPUTER CO., LTD.
Operation Guide 5434/5451
Your watch may differ somewhat from the one shown in the illustration.
Some models may use a combination of hands and rotating disks to indicate
information. The word “hand” in this section is used to mean both analog hands
and rotating disks.
Using the Stopwatch
The stopwatch measures elapsed time in 1-second increments up to 29 minutes,
59 seconds.
Elapsed time
5434
Stopwatch Minute Hand
Hour Hand
Minute Hand
24 Hour Hand
5451
A
Start
A
Stop
A
Resume
A
Stop
B
Reset
Split time
Hour Hand
24 Hour Hand
Minute Hand
A
Start
B
Split
B
Split release
A
Stop
B
Reset
Two finishes
A
B
Split
First runner
finishes.
Display time of
first runner.
A
Stop
Second runner
finishes.
B
Split release
Display time of
second runner.
B
Reset
A
A
Click 1
30
Click 2
Start
Crown
Important!
Do not operate the stopwatch with the crown pulled out.
Day Indicator
Second Hand
Second Hand
Stopwatch Second Hand
Stopwatch functions
To adjust the time setting
When the second hand is at
12 o’clock, pull the
Crown
out to
Click 2.
Rotate the
Crown
to change the
time setting.
Push the
Crown
back in.
30
B
B
Day Indicator
Note
An elapsed time operation will stop automatically at the end of 30 minutes.
Correcting the 0 Positions of the Hands
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Pull the
Crown
out to Click 2.
To change the day indicator setting
Pull the
Crown
out to Click 1.
Use
A
(clockwise) and
B
(counterclockwise) to move the
Stopwatch Second Hand
and
Stopwatch Minute Hand
to 12 o'clock.
Holding down either button will move the second hand at high speed, until you
release the button.
The
Stopwatch Minute Hand
is syncronized with the
Stopwatch Second Hand
.
Rotate the
Crown
to set the day.
Push the
Crown
back in.
Note
Note
Take care that you set the correct AM
or PM time.
When changing the time, move the
minute hand four or five minutes past
your final setting, and then back it up
to the setting you want.
The day indicator setting uses a 31-
day month. Make adjustments for
months of shorter lengths.
Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly at
midnight.
After all of the hands are the way you want, push the
Crown
back in.
Important!
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
Specifications
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
Crown
Accuracy:
±20 seconds average per month
Stopwatch:
Measuring Capacity: 29'59" (30 minutes)
Measuring Unit: 1 second
Measurements: Elapsed time; split time; two finishes
Battery:
One silver oxide battery (Type: SR920SW)
Battery Life:
Approximately 3 years (30 minutes stopwatch operation per day)
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Start
Elapsed time
Current
1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin