YI Smart Dash Camera Firmware Update.pdf

(162 KB) Pobierz
2.09.2019
https://www.yitechnology.com/support/firmware_en
YI Smart Dash Camera Firmware Update
Latest firmware version:
V-x.xx.xxx-US
Device Requirement:
1.
One Class10 80 MB/s reading speed micro SD card, 8-32 GB
2.
One Windows PC
3.
USB power source, can be USB charging port or portable USB battery kit, 1A Output
Update Instructions：
A. If YI Smart Dash Camera can boot normally
1.
Download firmware.bin to the micro SD card and put it in the root directory (make sure the file name remains
firmware.bin)
2.
Insert the micro SD card in the camera
3.
Connect the camera to a power source, then switch on the camera
4.
A firmware update notice will pop up on the screen
5.
Press the fourth button (Power and Setting) to update
6.
Wait for 1-5 minutes before the update is successful and the camera is restarted
Notice: NEVER cut off the power source or shut down the camera while update is in progress.
B. If YI Smart Dash Camera cannot boot normally, try push the reset button on
the top of the camera with a pin. If the camera still cannot boot:
1.
Download FWCARC10.bin to the micro SD card and put it in the root directory (make sure the file name
remains FWCARC10.bin)
2.
Insert the micro SD card in the camera
3.
Connect the camera to a power source, then switch on the camera
4.
The yellow light at the right-bottom corner of the camera will flash, but the screen remains dark (if the light is
not flashing, push the reset button on the top of the camera with a pin)
5.
Wait for 1-5 minutes before the update is successful and the camera is restarted
6.
Format the micro SD card after the camera is successfully restarted, otherwise the update process will be
started every time the camera is restarted
Notice: NEVER cut off the power source or shut down the camera while update is in progress.
https://www.yitechnology.com/support/firmware_en
1/1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin