Battery Test Module.pdf

(528 KB) Pobierz
BATTERY TEST
MODULE
Operator’s Manual
PATENTS
The Battery Test Module is made in the U.S.A. by Midtronics, Inc. and is protected by one or more of the
following U.S. Patents: 6,586,941, 6,323,650; 6,316,914; 6,304,087; 6,249,124; 6,163,156; 6,091,245;
6,051,976; 5,831,435; 5,821,756; 5,757,192; 5,592,093; 5,585,728; 5,572,136; 4,912,416; 4,881,038;
4,825,170; 4,816,768; 4,322,685; Canadian patents: 1,280,164; 1,295,680; United Kingdom patents:
0,417,173; 0,672,248; German patents: 689 23 281.0-08; 693 25 388.6; 93 21 638.6; and other U.S. and
Foreign patents issued and pending. This product may utilize technology exclusively licensed to Midtronics,
Inc. by Johnson Controls, Inc. and/or Motorola, Inc.
Copyright © 2004 Vetronix Corporation
Mastertech
®
is a registered trademark of Vetronix Corporation
Printed in USA 10/04
Manual P/N 08002763 Ver. B
SOME THINGS YOU SHOULD KNOW
WARNING!
EXHAUST GAS
When performing any checks with the engine running in an enclosed space
(such as a garage), be sure there is proper ventilation. Never inhale exhaust
gases; they contain carbon monoxide, a colorless, odorless extremely
dangerous gas which can cause unconsciousness or death.
WARNING!
AVOIDING INJURY
To help avoid personal injury, always set the parking brake securely and
block the drive wheels before performing any checks or repairs on the
vehicle.
ELECTRICAL
WARNING!
Do not allow anything to rest on the cable assembly. Do not allow the
cable assembly to be pinched. Keep the cable assembly away from contact
with heat, oil, sharp edges, or moving parts. Replace damaged cables
immediately. Damaged cables increase the risk of electric shock.
To reduce the risk of electrical shock, do not disassemble the Battery Test
Module. There are no user-repairable components inside the equipment.
AVOIDING INJURY
WARNING!
Read and understand all instructions in this manual. Use appropriate
personal safety equipment, including hearing and eye protection when
using the scanner in or near the vehicle engine compartment. Failure to
comply can result in accidents involving fire, electrical shock, or serious
personal injury.
DISCLAIMER
The Mastertech is designed for use by trained service personnel only. It has been developed for the sole
purpose of diagnosing and repairing automotive electronic systems. Every attempt has been made to provide
complete and accurate technical information based on factory service information available at the time of
publication. However, the right is reserved to make changes at any time without notice.
Battery Test Module
Page iii
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his or her own expense.
USE AND CARE
•
Stay alert, pay attention to what you are doing, and use common sense when operating the Battery Test
Module. Some tests require the engine to be running. Keep all children and visitors at a safe distance
from the work area.
Keep the Battery Test Module dry, clean, and free from oil and grease. Use a mild detergent on a clean
cloth to wipe the outside of the test equipment when necessary.
Only use accessories that are recommended by Vetronix.
•
•
SERVICE
Service must only be performed by Vetronix repair personnel. Service or repair by unqualified personnel
may result in risk of injury and/or damage to the test equipment, and may void your warranty. Refer to the
Product Warranty Policy.
Battery Test Module
Page iv
PRODUCT WARRANTY POLICY
•
Vetronix warrants to its customers that, on the date the Products are delivered, they shall be free from
defects in manufacture. Your receipt is your proof of purchase and will be required to receive service
under this warranty.
This warranty shall apply only to defects that appear within 365 days, and which are reported to Vetronix
within 455 days, following the date the Products are delivered.
New replacement Products are warranted as new.
Reconditioned replacement Products and repaired Products are warranted as new for the longer of the
remainder of the original warranty period or 90 days from the date of delivery of the repaired or replaced
Product.
This warranty does not cover defects caused by abuse, mishandling, accident, improper installation or
application, the malfunction of another component or part of any device in which the Products installed
or with which the Product interfaces, or extend to Products which have been modified or repaired by
anyone except Vetronix or its authorized service representative, or to a Product with respect to which the
serial numbers or identification marks have been altered or removed.
Vetronix makes no other warranties other than those expressly stated herein.
Vetronix’s customers’ exclusive remedy under this warranty is repair or replacement at Vetronix’s option
and such repair or replacement shall satisfy Vetronix’s warranty obligation to its customers whether in
contract, tort, negligence, strict liability or otherwise.
Prior to returning a Product for warranty adjustment, Vetronix shall require a return authorization and
will issue a return authorization number. The return authorization number shall be placed conspicuously
on the outer package-shipping label. Products returned to Vetronix shall be accompanied by the proof of
purchase, a written description of the reasons for return, the circumstances under which the defect
became apparent and the date the defect occurred or, if not known, the date the defect was discovered.
If a returned Product is found not to be defective, Vetronix shall return the product and invoice for the
costs of testing and return shipment.
If a returned Product is found to contain a defect which is not covered by this warranty, Vetronix shall
provide a written quotation showing the estimated cost of repair or the price of a replacement. In the
event instructions as to the disposition of the product are not received within 30 days from receipt of
such estimate or quotation, Vetronix shall return the product and invoice for the cost of testing and return
shipment.
If a returned Product is found to be defective and such defect is covered by this warranty, Vetronix shall
at its option and at no charge to the customer, with valid proof of purchase, repair or replace the Product.
Following such repair or replacement, Vetronix shall return the Product at Vetronix’s expense.
•
•
•
•
•
•
•
•
•
•
Return for Repair
If it becomes necessary to send the Battery Test Module back to us for repair, contact Vetronix at
1-800-321-4889, ask for an RMA number, then send the product and copy of proof of purchase to:
Vetronix
2030 Alameda Padre Serra
Santa Barbara, CA 93103
Battery Test Module
Page v

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin