Installation Instruction.pdf

(53 KB) Pobierz
Installation Instruction, Mechanical
Installation Instruction, Mechanical
Applicable for C702, C702a & C702c
Contents
1
2
General ............................................................................................................... 2
Hardware ............................................................................................................ 2
2.1
Setup ..................................................................................................... 2
2.2
Computer............................................................................................... 2
2.3
Sony Ericsson programming interface – DCU-65 ................................. 2
2.4
Smart Card Reader/Service Card ......................................................... 2
2.5
USB Activation Dongle .......................................................................... 3
2.6
Bluetooth Device ................................................................................... 3
2.7
Label Printer .......................................................................................... 3
2.8
Power Supply and Jumper Cables (optional) ........................................ 3
Software ............................................................................................................. 4
3.1
EMMA.................................................................................................... 4
3.2
Labelmake II software ........................................................................... 4
Revision History ................................................................................................ 5
3
4
1213-5340 1
Company Internal
©
Sony Ericsson Mobile Communications AB
Installation Instruction, Mechanical
1 General
This document describes the installation procedure for the Mechanical repair
package.
2 Hardware
All hardware necessary for this product’s setup is documented in the Mechanical
Equipment List.
2.1 Setup
NULL
MODEM
CABLE
BLUET
OOT
H
T TDEVICE
ES
ZEBRA
LABEL
PRINT
ER
SSON
ce Card
LZY 213 595 R1A
S
ERVICE CARD
READER
(Used with the
Label Printer)
COMPUT
ER
DCU-65
CABLE
2.2 Computer
An IBM compatible computer is required. The computer should include at least three
USB-ports. Refer to the Equipment List for minimum computer requirements.
2.3
Sony Ericsson programming interface – DCU-65
The cable is the interface between Computer and the phone. The DCU- 65 cable
should be connected to a USB-port on the computer.
2.4 Smart Card Reader/Service Card
NOTE!
The Smart Card Reader/Service Card is only needed for LabelmakeII.
Service Card
2(5)
Smart Card Reader
1213-5340 1
Company Internal
©
Sony Ericsson Mobile Communications AB
Installation Instruction, Mechanical
The Smart Card Reader comes with the necessary software and instructions for
installation.
1.
Connect the Smart Card Reader to one of the USB ports on the computer.
2.
Install Service Card into the Smart Card Reader.
2.5 USB Activation Dongle
A USB Activation Dongle is required for activation in EMMA. Refer to the EMMA
Homepage available from CSPN, for installation instructions.
2.6 Bluetooth Device
Any Bluetooth device such as a headset or Bluetooth phone can be used to verify the
Bluetooth function in the phone. Set up the connection according to the chosen
equipment’s manufacturer’s instructions.
2.7 Label Printer
A Zebra printer should be set up to print labels. Connect the printer with a Null
Modem cable to the serial port on the computer. Read the Zebra installation manual
for more information about the installation.
Refer to Equipment list for support Zebra printers.
2.8 Power Supply and Jumper Cables (optional)
1.
Install the power supply according to the manufacturer’s instructions.
2.
Connect the jumper cables to the power supply’s output terminals. Red to the
positive output terminal and black to the negative output terminal.
3.
Connect the banana plugs of the red and black jumper cables to the battery
eliminator’s red and black connectors.
4.
Set the output of the Power Supply as follows:
•
•
Voltage: 3.8Vdc
Current: 2.0 Amps
1213-5340 1
Company Internal
©
Sony Ericsson Mobile Communications AB
3(5)
Installation Instruction, Mechanical
3 Software
3.1
EMMA
EMMA contains software upgrades and tools that are required for servicing this
phone. Installation and user manuals are accessible through CSPN web page.
1. Log onto CSPN. (https://cspn.extranet.sonyericsson.com)
2. Select “EMMA” from the drop down menu.
3. Select “GO TO EMMA HOME PAGE”.
4. Select “Installation Guide” under Documentation and follow the directions for
installation.
3.2
Labelmake II software
The LabelMake II software is an application that allows new labels to be printed with
a Zebra printer.
1. Log onto CSPN. (https://cspn.extranet.sonyericsson.com.)
2. Select “LabelMake II” from the drop down menu.
3. Press “START LabelMake II” button and you will be directed to the
LABELMAKE II client page.
4. Select “Launch Labelmake II client” and follow the installation instructions.
1213-5340 1
Company Internal
©
Sony Ericsson Mobile Communications AB
4(5)
Installation Instruction, Mechanical
4 Revision History
Rev.
1
Date
2008-05-22
Changes / Comments
First Release
1213-5340 1
Company Internal
©
Sony Ericsson Mobile Communications AB
5(5)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin