LVCCFSB2005_286 V3 Camera insufficient solder.pdf

(128 KB) Pobierz
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
FIELD SERVICE BULLETIN
FSB Number:
Authors:
Date:
Total No. of Pages:
Subject:
Model Affected:
Level of Repair:
LVCCFSB2005-286
Darwin Garcia
September 12, 2005
2
V3 Camera Module Insufficient Solder
V3
3&4
Problem
Service has been made aware of a V3 insufficient solder issue on the camera module
causing “Camera - Poor Quality and Camera - No Function” complaints.
The root cause was determined to be soldering joint issue on the camera module cause by
insufficient solder paste.
MOTOROLA INTERNAL USE ONLY
Page 1
Consumer Solutions & Support
US Competency Center
600 North US Highway 45
Libertyville, Illinois 60048
Solution
The Camera supplier modified stencil and solder paste for SMT process to improve
solder quality and quality supervisors instructed operators to enhance solder insufficient
symptom inspection. The corrective action was implemented on 8/24/2005, so all camera
modules manufacture after date code TW0539 has the improvement.
Field Service Action
Customer Returns:
When servicing any V3 customer phones with described issue, the camera module must
be replace. Camera Module part# 8488310Y
Call Center Action:
Call center should advise callers have their phone send for repair.
Service Inventory
N/A
Note: A spare part purge in NOT necessary.
Global Codes
M Claims:
Customer Complaint Codes: CAM01 (Camera - Poor Quality)
Problem Found Code: CAM01 (Camera - Poor Quality)
Repair Code: RCA01 (Replace Camera - No operation)
Or
Customer Complaint Codes: CAM02 (Camera - No Function)
Problem Found Code: CAM02 (Camera - No Function)
Repair Code: RCA01 (Replace Camera - No operation)
MOTOROLA INTERNAL USE ONLY
Page 2

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin