Test_Instruction.PDF

(88 KB) Pobierz
Test Instruction, Electrical
Test Instruction, Electrical
Applicable for K510
1
2
3
Abstract
..........................................................................................................................2
Test Procedure
.............................................................................................................2
Test flow
.........................................................................................................................2
3.1
Software Update
.............................................................................................2
3.1.1
Verify Software Version
.................................................................................2
3.1.2
Update Software Version...............................................................................2
3.2
Go/No-Go Test
................................................................................................3
3.3
Service Tests...................................................................................................5
3.3.1
Main Display Test
...........................................................................................5
3.3.2
Camera Test
....................................................................................................5
3.3.3
LED/Illumination Test
.....................................................................................5
3.3.4
Keyboard Test
.................................................................................................6
3.3.5
Vibrator Test
....................................................................................................6
3.3.6
Earphone Test.................................................................................................6
3.3.7
Speaker Test
...................................................................................................6
3.3.8
Microphone Test
.............................................................................................7
3.3.9
Real Time Clock Test.....................................................................................7
3.4
Manual Tests
...................................................................................................8
3.4.1
On The Air Call To Mobile
.............................................................................8
3.4.2
Infrared Test
....................................................................................................8
3.4.3
Bluetooth Test
.................................................................................................8
3.4.4
System Connector Test
.................................................................................9
Revision History
...........................................................................................................9
4
2/000 21-2/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
Approved according to 1/109 41-4/FCP 101 3650/2
Test Instruction, Electrical
1 Abstract
This document describes the test procedure for the Electrical repair package.
2 Test Procedure
To verify all components within the Electrical repair package, all tests must be performed.
3 Test flow
If the phone passes these tests without any failures, it is OK to return it to the customer.
If there are any failures, the phone must be repaired according to the troubleshooting guide or
sent to a higher repair level.
3.1
Software Update
Update to latest signalling software and run the service activities software from EMMA III.
3.1.1
Verify Software Version
To verify if the phone needs new software, you have to check the current Software Version in
the phone. Software Versions are checked through the following steps:
1. Start up the phone.
2. Press the following navigation-key and keyboard sequence:
!!""!"!
3. Select Service info.
4. Select SW Information.
5. Check the file revisions on the display.
6. Press OK to return to the Service info menu.
3.1.2
Update Software Version
Update the software in the phone by doing the following steps:
1. Make sure that the phone’s battery is fully charged or use a dummy battery and a
power supply. Connect correct flash cable and interface according to the Installation
instruction.
2. Connect to the EMMA III server, choose application "GSM" and follow the instructions.
2/000 21-2/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
2(9)
Test Instruction, Electrical
3.2
Go/No-Go Test
This test verifies that the radio parameters of the phone fulfil the EGSM900/GSM
1800/GSM1900 specification. If all measurements are approved, this will be confirmed. If
any faults are discovered, this will be presented either on the screen or printed out. It’s
possible to do this test either with antenna coupler from Rohde&Schwarz or RF adapter.
When using RF adapter a dummy battery shall be used.
It’s very important that a fully charged battery is used otherwise there is a risk for wrong test
results.
Antenna Coupler
•
Insert a test-SIM and a fully charged standard battery. Position the phone in the coupler
according to the pictures (Fig 1).
RF adapter
•
Insert a test-SIM and a dummy battery. Assemble the RF adapter according to Fig 2.
Connect the RF cable (RPM 119 855) between the Test set and the antenna adapter.
Fig. 1 Position of the phone in to the
Rohde&Schwarz holder.
2/000 21-2/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
3(9)
Test Instruction, Electrical
1 Press the antenna connector gently against the external
antenna connector. Slide the adapter towards the RF-connector
until the adapter is in place.
1. Start the Test set, and run the script called “XXXX”.
NOTE!
The script will be added later.
2. Follow the instructions on the Test instrument during the test.
2/000 21-2/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
4(9)
Test Instruction, Electrical
3.3
Service Tests
NOTE!
It is not necessary to have a SIM card inserted.
Start the phone.
The Service Tests menu is entered using the following navigation-key and key sequence:
!!""!"!
and select “Service Tests”.
3.3.1
Main Display Test
To verify the display:
1. Select “Main Display” from the “Service Tests” menu.
2. The display toggles between four different test patterns.
Make sure that there are no dots missing and that the colours and contrast is OK.
3. Press the “#” key to go back to the service tests menu.
3.3.2
Camera Test
To verify the camera functionality:
1. Select “Camera” from the “Service Tests” menu.
2. Open the camera shutter on the backside of the phone.
3. The camera function will now starts and are visible in the display. Make sure that the
contrast and light is OK.
4. Close the camera shutter to go back to the service tests menu.
3.3.3
LED/Illumination Test
To verify that the backlight and the Top LED are OK:
1. Select “LED/illumination” from the “Service Tests” menu.
2. Check that the backlight on the LCD and the keyboard is toggle between on and off.
3. Check also that the red led in the IrDA-window is toggle between on and off.
4. Press the “Ok” key to go back to the service tests menu.
2/000 21-2/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
5(9)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin