Installation Instruction.pdf

(60 KB) Pobierz
Installation Instruction, Mechanical
Installation Instruction, Mechanical
Applicable for W890
Contents
1
2
General............................................................................................................................. 2
Hardware......................................................................................................................... 2
2.1
Test Setup .......................................................................................................... 2
2.2
Computer ........................................................................................................... 3
2.3
Sony Ericsson programming interface cable – DCU-65 ................................... 3
2.4
Bluetooth Device ............................................................................................... 3
2.5
Power Supply (optional).................................................................................... 3
2.6
Battery Eliminator (Dummy Battery)................................................................ 3
2.7
Label Printer ...................................................................................................... 4
Software ........................................................................................................................... 5
3.1
EMMA III.......................................................................................................... 5
3.2
Labelmake II software....................................................................................... 5
Revision History.............................................................................................................. 6
3
4
1209-0965 Rev 1
©
Sony Ericsson Mobile Communications AB
1209-0965
Installation Instruction, Mechanical
1 General
This document describes the installation procedure for the Mechanical repair package.
The Mechanical repair package consists of a Computer and Interface Cables. A label
printer can be installed to be able to print new labels.
2 Hardware
All hardware must be approved by Sony Ericsson and is documented in the Equipment
List.
2.1 Test Setup
ZEBRA
DCU-65
CABLE
NULL
MODEM
CABLE
The equipment in this picture is specified in the Equipment List.
1209-0965 Rev 1
©
Sony Ericsson Mobile Communications AB
2(6)
Installation Instruction, Mechanical
2.2 Computer
IBM compatible computer is required. The computer should have a USB-port. Refer to
Equipment List for minimum requirements.
2.3 Sony Ericsson programming interface cable – DCU-65
The cable is the interface between the computer and the phone. The DCU-65 cable
should be connected to a USB-port on the computer.
2.4 Bluetooth Device
Any Bluetooth device such as a headset, other Bluetooth phone or other Bluetooth
device can be used to verify the Bluetooth function in the phone. Set up the connection
according to the chosen equipment’s manufacturer instructions.
2.5 Power Supply (optional)
A Power Supply according to the Mechanical Equipment List may be used.
Set the output of the Power Supply as follows
•
•
Voltage: 3.8Vdc
Current: 2.0Amps
2.6 Battery Eliminator (Dummy Battery)
A Battery Eliminator is to be used together with a power supply to power the phone.
Connect the cables from the battery eliminator to the power supply, red cable to positive
output terminal and black cable to negative output terminal.
1209-0965 Rev 1
©
Sony Ericsson Mobile Communications AB
3(6)
Installation Instruction, Mechanical
2.7 Label Printer
A Zebra printer shall be used. Connect the printer with a Null Modem cable [refer to the
Zebra printer manual] to the serial port on the computer. Read the Zebra installation
manual for more information about the installation.
1209-0965 Rev 1
©
Sony Ericsson Mobile Communications AB
4(6)
Installation Instruction, Mechanical
3 Software
3.1 EMMA III
EMMA III contains software upgrades and tools required for servicing this phone. Emma
III is accessible through the CSPN web page. Installation and user manuals are
available at the EMMA III start page.
http://ma3.extranet.sonyericsson.com/ma3/
3.2 Labelmake II software
LabelMake II is an application installed through Java Web Start.
Access the Labelmake II software from the CSPN Web page.
You will find LabelMake II in the dropdown menu on the CSPN web page.
http://cspn.extranet.sonyericsson.com
Press “START LabelMake II “button and you will be directed to the LABELMAKE II client
page.
Product labels are downloaded on-line from a remote server database.
1209-0965 Rev 1
©
Sony Ericsson Mobile Communications AB
5(6)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin