AUA496GBD(1).PDF

(10 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
MAKE
ALARM/SIREN
POSITION
POWER SUPPLY
AUDI
MOD.
A4
YEAR.
96
X
Position the compact alarms and the sirens on the right side of the engine
compartment, under the coolant bowl.
+ 30:
Connect with a ring terminal to a + 30 threaded pin in the fuse box.
- 31:
Connect with a ring terminal to one of the terminals coming out of the original
power supply on the left side, driver’s side.
+15/54:
connect to the 2 mm GREEN/RED wire located in the wiring harness
behind the left lateral bulkhead, driver’s side.
Connect to the 1 mm BLACK/WHITE and BLACK/GREEN wires located in the
wiring harness coming out of the 6 way yellow connector nr.8 located at the rear
side of the covering of the left lateral pillar.
Comfort closing
Negative control signal (lock doors + windows):
connect to the BROWN/GREY wire of the 2nd connector located on the left side,
driver’s side. It is necessary to set lock command wire to 12-24s.
2
2
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
CENTRAL DOORS LOCKING Negative control signal (unlock/lock doors only):
Connect to the GREY/RED (alternatively GREY/WHITE) wire (unlock) and
RED/BLUE (lock) located in the 2nd connector down in the left side of the sill
cover, driver’s side.
IMMOBILISATION POINT
Gasoil pump
2
Cut the 1,5 mm BLUE/BLACK wire located in the wiring harness coming out of the
3 way connector directly on the gas oil pump.
+50:
Cut the 1,5 mm RED/BLACK wire in the wiring harness coming out of the
BROWN/VIOLET connector at the rear section of the relay marked nr.205 located
under the dashboard, driver’s side.
Connect to the 1 mm BROWN/RED wire located in the wiring harness coming out
of the LIGHT BLUE/BLACK connector under the dashboard, driver’s side.
Connect to the 1 mm BROWN/WHITE wire located in the wiring harness under the
sill cover, driver’s side.
2
2
2
STARTER
BONNET SWITCH
DOORS AND BOOT SWITCH
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
aua496gbd.doc
Zgłoś jeśli naruszono regulamin