Disassembly & Reassembly.pdf

(3658 KB) Pobierz
11. Disassembly and Assembly Instructions
11-1. Disassembly
1
2
1)
Remove the 4 marked screws
3
1)
Using the disjointing knife, separate the 2
hook parts of the Rear
※
Caution
1) Be careful not to make molding damage!
4
②
①
1)
Pulling the Rear to
the
ⓛ
direction,
Lift it to
the ② direction
1)
Separate the marked connector
※
Caution
1) Be careful not to ripe and crease the FPCB
11-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
5
6
②
①
1)
Pushing the PBA to
the
ⓛ
direction,
Lift it to
the ② direction
7
1) Separate the slide FPCB connector
8
1)
After separating the 4 marked screws,
separating the Front
1)
Separate the 4 marked screws
11-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
9
10
1)
Using the disjointing knife, separate the 2
hook points of the middle of the Lower
11
1)
Using the disjointing knife, separate the
middle hook point of the Lower
※
Caution
1) Be careful not to make molding damage
12
①
1)
Pushing the Lower to the ⓛ direction,
separate the Lower from the Upper
1)
Separate the motor, SPK, and camera
※
Caution
1) Be care of making the motor wire and FPCB
damage
11-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
13
14
1) Separate the slide FPCB
※
Caution
1) Be care of making the motor wire and FPCB
damage
15
1) Separate the
LCD module
※
Caution
1) Be care of making the FOG and LCD
damage
1) Separate the Sub keypad from the Upper
11-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View and Parts List
11-2. Assembly
1
2
1) Put the Sub key
pad on the Upper
3
1) Put LCD Module on the Upper
4
③
②
①
1)
After connecting the FPCB with the LCD
ASS'Y, put the ①
Camera,
②
SPK
, and ③
Motor
on the Upper
1) Connect the LCD connector with the LCD ASS'Y
※
Caution
1) Assemble the parts in order and arrange the
motor wires not to be crushed by the SPK
11-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin